Cleaning And Maintenance - Linea 2000 DOMO DO1128S Instruction Booklet

USE
1. Unwind the cord to a substantial length and plug in the vacuum cleaner. The yellow label on the cord
indicates the maximum length of the cord, that should not be exceeded.
2. To turn the vacuum cleaner on and off, press the foot pedal with the
3. The suction can be controlled using the valve on the handle of the hose. The appliance has a strong
suction force. This could cause the end of the floor nozzle to attach to the floor. If you want to
reduce the suction force, you can slide open the valve on the handle of the hose.
· Carpets: ensure that the switch on the floor nozzle is set to
· Hard floors: ensure that the switch on the floor nozzle is set to
4. When you have finished vacuuming, unplug the vacuum cleaner and automatically rewind the cord
by pressing the foot pedal with the
forth while rewinding the cord, by guiding the cord with your hand. This to prevent possible damage.
2-IN-1 CREVICE ATTACHMENT
You can use the 2-in-1 crevice cleaner for hard-to-reach places such as radiators,
crevices, corners, between cushions, etc. Click the brush up for furniture, shelves, etc.

CLEANING AND MAINTENANCE

EMPTYING AND CLEANING THE DUST RESERVOIR
Empty the dust reservoir regularly. Make sure that the dust in the dust reservoir does not exceed the
maximum level.
1. Take the handle of the vacuum cleaner and press the button. Carefully remove the dust reservoir
from the vacuum cleaner.
2. Hold the dust reservoir above the dustbin. Press the button to empty the dust reservoir. The bottom
will click open and the dust will fall out.
3. If necessary, wipe the dust reservoir clean with a soft, damp cloth.
4. Once the dust is removed, close the bottom until you hear it click.
To prevent losing suction after emptying the dust reservoir, it is essential that the long interior filter is
checked for blockages.
1. To do this, completely remove the dust reservoir by unscrewing the handle counter-clockwise. Keep
an eye on the slots of the dust reservoir.
2. Unscrew the filter from the handle.
3. Remove the outer filter (A) from the HEPA filter (B) by pulling it up.
4. All parts may be cleaned under running water. Make sure all parts are completely dry before
reassembling and using the vacuum cleaner again.
1
www.domo-elektro.be
symbol. Make sure that the plug does not whip back and
1
symbol.
.
.
2
35
DO1128S