Table of Contents
Advertisement
BTC22-*
BIOS Settings
Settings for Serial Port 1
Mode select
RS-232
RS-422
RS-422 Termination Resistor
RS-485
RS-485 Termination Resistor
5.3
USB Configuration
USB Configuration allows you to view and configure USB parameters.
The USB device displays the USB device detected by the BIOS during the power-on self-test.
Figure 5.5
Enabling and Disabling the USB Device
1.
Select USB Mass Storage Driver Support using the arrow keys and press Enter.
2.
Select Enabled or Disabled as needed. Press Enter in the pop-up window.
38
Enabling and disabling the USB device
Advertisement
Table of Contents
