Pepperl+Fuchs BTC22 Series Manual page 10

BTC22-*
Product Description
Dual Monitor Setup
Figure 3.1
The BTC22 is optimized for modern, Ultra HD-compatible monitors. In a standard scenario, up
to two Ultra HD-capable monitors can be connected to the native DisplayPorts™. Additionally
an third Ultra HD Monitor can be connected via the USB Type C port.
The DP++ functionality in the DisplayPort™ interface also allows the connection of monitors
with an HDMI interface. Passive DisplayPort™ to HDMI adapter cables can be used and are
available as accessories. When using an adapter, the maximum supported resolution is limited
to Full HD.
An active DisplayPort™ to HDMI 2.0 adapter is required to connect an Ultra HD-capable moni-
tor or TV through an HDMI 2.0 interface. These adapters are available as accessories.
DisplayPort™ Multi-Stream Transport (MST) protocol technology allows a series connection of
up to three monitors. This requires monitors that have a DisplayPort™ MST hub. Monitor 1 is
connected direct to the BTC22 DisplayPort™ and the video signal is connected to monitor 2
and monitor 3 in series.
Note
The BTC22 allows a series connection of up to three monitors.
10
Two monitors with Ultra HD resolution (4K at 60 Hz)