Modulation Level/Dynamrc Control - Kenwood KDC-CMP59FM Instruction Manual

1 To set the control mode
Press the RDM button on the display unrt for at least three
seconds.
The LEVEL indicator will light up and the currently set
modulatron level WIII be displayed.
Modulation level
pYi?FrJ
Number for prevention of
lNOTEl
distortion setting
l
If thus functron is on, the functrons other than power on / off,
reset, and changing the transmissron frequency, cannot be
operated.
*This function is not available when the random play, repeat play,
or scan play function IS on. Before usrng thus function, cancel
the other functions. Thus function cannot be used while loading
a disc (while the play Indicator is blrnkrng).
2 To change the modulation level
Press either the I* or ))I button.
Each time the 144 or ))I button IS pressed, the modulatron
level changes In the range from 1 to 4. As the number
Increases. the modulatron level Increases The rnrtral setting IS 2.
m Dynamic control
The unit comes with the prevention of distortion function to
reduce sound distortion.
If the sound is distorted severely, press the -I- button on the
display unit and then set the function to "2" (ON). If the
prevention of distortion function is set to "2" (ON), the sound
extension is reduced.
The initial settrng IS "1" (OFF).
riizG%F
If a disc with a high recording level IS used, the sound may
distort even if the prevention of distortron function is set to "2"
(ON). In ths case, reduce the modulatron level.
To cancel :
Press the RDM button on the display unit for at least three
seconds.
The LEVEL indicator will go off and the modulation level
change will take effect The control mode IS automatically
canceled if you do nothing for 15 seconds.
-15-