Chasing M2 PRO User Manual page 4

Connect ROV with Remote Controller
2
a. Insert one end of the tether connector into the remote controller connector socket.
b. Reserve a suitable length and hang the Buckle on the Buckle Bracket, and make it tension.
c. Insert the other end of the tether connector to the ROV.
d. Securely hand-tighten both connectors.
Start (turn on) the ROV
3
a. Turn on the remote controller power button.
b. A few seconds later, the remote controller' s
indicator lights up, 5G or 2.4G light will be always on.
The drone LED lights will flash shortly,
accompanied by two self-tests sounds.
c. Check all the connectors and lights pre-dive, and
unlock the ROV when everything is ready underwater.
Connect remote controller to your phone/tablet
4
Method 1： USB Direct Cable Connection
Choose an appropriate remote controller cable based
on the type of mobile device. A Lightning connector cable,
micro USB cable, and TYPE-C cable are included in the
packaging. Connect the end of the cable with the mobile
phone logo to the mobile device.
Note: * It is recommended to use this kind of way to
connect mobile phone/tablet and remote controller.
* If the connection fails, please try to turn off your phone's
Wi-Fi and mobile network. If still fails, it may be a phone/
tablet compatibility problem. Please select method 2
Wi-Fi connection. * The remote controller type-c port and
attached remote controller cables do not support charging.
* 2 Warning: Check whether the O-ring on the tether connector pre-dive. If it is missed or damaged, please
replace it in time.
Method 2： Wi-Fi Connection
a. On the Phone/Tablet, go to Wi-Fi settings.
b. Wait for 5-10 seconds and the Chasing_xxxx network will appear as an option.
c. Click to connect and enter the Wi-Fi password: 12345678
6:27 89%
Wi-Fi
Settings
Wi-Fi
Chasing_xxxxx
CHOOSE A NETWORK...
Gladius_5G_xxxxx
xxxxxxxxxx
xxxxxxxxxx
App interface Introduction
xxxxxxxxxx
5
Open the App and enter the camera, you will see the real-time scene transmission.
General
Settings
Return
VR Live Stream
Shrink Slow
Side
Video Motion
Menu
Temperature
Depth
3D
Gesture
Light
Angle
Unlock/lock
Drop the ROV into Water
6
a. Grasp the grips on both sides of the ROV with both hands and gently throw the ROV into the water.
b. Unlock the Thruster(motors) to dive.
c. For a better experience, it is recommended to ensure that the water depth exceeds 1 meter.
5
* Note： You could check more guidance videos on the website page https://www.chasing.com/,or you
could contact the global support team with any questions ： support@chasing-innovation.com
Compass Signal Strength
ROV Mode
Battery
White
Balance
Lock
Picture
Video
Recording
Camera
Settings