Table of Contents
Advertisement
Control panel
Control panel functions
Main screen items
The main screen of the HMI panel shows the information and the settings options that a user mostly requires.
Icon User programe active
Icon Week programe active
Main screen settings options
The settings options that are necessary in daily life can all be set on the main screen of the panel.
If you press current fan speed level, the set fan speed level will
be displayed.
You can change the fan speed level by using the up-and-down
arrows followed by the confirm icon (bottom right) or the cancel
icon (bottom left).
There may be a difference between set fan speed level and the
actual fan speed level as the control system will override the
set level, for instance, at high/low air humidity or during cooker
hood operation.
1. Shows the current room temperature in the house,
measured via the extract air
2. Shows the current fan speed level
3. Shows the current air humidity in the extract air
4. Shows the current CO
2
(Does not appear if sensor is not installed)
5. Shows operation ikon (see below)
6. Access to the settings menu, where there are several opti-
ons.
Icon Ventilation unit has stopped
Icon Active alarm or warning
If you press current room temperature, the set room
temperature will be displayed.
You can change the room temperature by using the up-and-
down arrows followed by the confirm icon (bottom right) or the
cancel icon (bottom left).
level in the extract air
5
Advertisement
Table of Contents
