Table of Contents
Advertisement
Quick Links
Road Sweeper Pump
Installation & USER INSTRUCTIONS
Thank you for purchasing this Whale® product.
For over 40 years Whale® has led the way in the design and manufacturer of freshwater and waste systems
including:- plumbing, faucets, showers and pumps for low voltage applications. The company and its products have
built a reputation for quality, reliability and innovation backed up by excellent customer service.
For information on our full product range visit: www.whalepumps.com
Read the following carefully before installation and use.
WARNING: Please note that incorrect installation may invalidate the warranty.
To the Fitter:
Check that the product is suitable for the intended application. Follow these installation instructions and ensure all
relevant personnel read the points listed below. Also ensure that these operating instructions are passed on to the
end user. The manufacturer cannot be held responsible for claims arising from incorrect installation, unauthorised
modification or misuse of the product.
To the User:
Read the following instructions carefully .
1.
SPECIFICATION
Product Code
Voltage
Open Flow Rate
Ingress Protection Rating
Recommended Fuse Size
Minimum Wire Size
Weight
Port Sizes
Connectors Used
Materials
IS1218B
12 V d.c.
12 Ltrs (3.2 US gals)/min
IP65
10 Amp Automotive
2.5mm² (13 AWG)
2.4kg (5.3 lbs)
Pump Body: Glass-filled Polypropylene
Diaphragm & Valves: Santoprene®
IS1218B / IS2418B
12 Ltrs (3.2 US gals)/min
5 Amp Automotive
2.5mm² (13 AWG)
2.4kg (5.3 lbs)
1/2" BSP Male
None
Seals: Viton®
IS2418B
24 V d.c.
IP65
Advertisement
Table of Contents
Related Manuals for Whale IS1218B
Summary of Contents for Whale IS1218B
- Page 1 Thank you for purchasing this Whale® product. For over 40 years Whale® has led the way in the design and manufacturer of freshwater and waste systems including:- plumbing, faucets, showers and pumps for low voltage applications. The company and its products have built a reputation for quality, reliability and innovation backed up by excellent customer service.
- Page 2 Improper wiring can cause a fire resulting in injury or death. Switch off the power while making connections. Suggested wiring information is given as a guide only. PARTS LIST Whale® Road Sweeper Pump and installation instructions. 2 Off ” BSP -...
- Page 3 SPARES AK1317 Microswitch Service Kit AK1322 Replacement Head Service Kit INSTALLATION Mounting the Pump • Locate the pump with adequate ventilation and no more than 3 meters from the tank. • The pump may be mounted horizontally or vertically, the preferred position for the pump is below the tank. •...
- Page 4 Check pump body is not in contact with hard surfaces Locate away from interfering surfaces Check pipework is securely supported For installation or service advice please contact Whale® customer support: SERVICE SUPPORT DETAILS Tel: +44 (0)28 9127 0531 Email: info@whalepumps.com www.whalepumps.com...
- Page 5 Whale. WARRANTY This Whale® product is covered by 2 years warranty. Please see the enclosed document for details of our statement of limited warranty. ©Copyright Whale 2017 - All rights reserved. Reproduction in whole or in part without permission is prohibited.
Need help?
Do you have a question about the IS1218B and is the answer not in the manual?
Questions and answers