Table of Contents
Advertisement
Available languages
Available languages
Quick Links
Thank you for purchasing this Whale® product.
For over 60 years, Whale has led the way in the design and manufacture of freshwater and waste
systems including: pumps, plumbing faucets, showers for low voltage applications. The company and its
products have built a reputation for quality, reliability and innovation backed up by excellent customer
service.
For more information please visit www.whalepumps.com
1. Specification
Product Code
WS7205(B)
WS7215B
WS7205(B)
3/8" (10mm) bore flexible hose
WS7215B
1/2" (13mm) bore flexible hose
* B suffix represents a bulk item.
2. To The User
Read the points listed below before installation and use of equipment.
WARNING: Please note that incorrect installation may invalidate warranty
3. To The Fitter
Ensure all relevant personnel read the points listed below and that a copy is passed on to the end user.
4. Application
Designed only for pressurised water systems to prevent water hammering and help reduce pump hunting i.e.switch
hunting on & off.
5. Warnings
1.
This product is designed for use with water. If it is intended for use with any other
liquid, it is the user's responsiblity to ensure that the materials are fully compatible
with the liquids to be used and that a system of safe working practice is applied to
installation, use and maintenance.
2.
The manufacturer cannot be held responsible for claims arising from incorrect installation,
unauthorised modification or misuse of the product.
6. Installation
Note: Incorrect installation will invalidate warranty
Preparation - Always disconnect power sources before installing.
The Surge Damper should be mounted in a vertical position immediately after the pump (discharge side) and
before the pipework divides off to hot water or additional taps. (See Fig 1)
Pipe System Used
12mm semi-rigid
15mm semi-rigid
Capacity
Maximum Pressure
Surge Damper
WS7205(B) / WS7215B
Connect directly using Whale® Quick Connect 12mm Fittings
Connect directly using Whale® Quick Connect 15mm Fittings
Stainless Steel Hose Clips
Stainless Steel Hose Clips
150ml (1/4 pint)
4 bar (60 psi)
Fitting Required
Advertisement
Table of Contents
Related Manuals for Whale WS7205(B)
Summary of Contents for Whale WS7205(B)
- Page 1 WS7205(B) / WS7215B Thank you for purchasing this Whale® product. For over 60 years, Whale has led the way in the design and manufacture of freshwater and waste systems including: pumps, plumbing faucets, showers for low voltage applications. The company and its products have built a reputation for quality, reliability and innovation backed up by excellent customer service.
- Page 2 8. Warranty This Whale® product is covered by a 1 year warranty. Please see the enclosed document for details of our statement of limited warranty. ©Copyright Whale 2016 - All rights reserved.
- Page 3 Merci d’avoir acheté ce produit Whale® . Depuis plus de 60 ans, Whale ® a ouvert la voie à la conception et la fabrication de systèmes d'eau douce et de traitement des eaux usées incluant: les pompes, la plomberie, les robinets et les douches pour les applications basse tension.
- Page 4 Whale® , le système complet doit être vidangé pour préparer l’hiver. 8. Garantie Ce produit Whale® est couvert par une garantie de 1 an – Merci de lire ce document ci-joint pour avoir plus de détails sur nos conditions de garantie limitée.
Need help?
Do you have a question about the WS7205(B) and is the answer not in the manual?
Questions and answers