Philips 355 Manual page 54

Number: allows you to enter the phone number
Phone
provided by your ISP and needed to establish a
+
connection. Press or
- to enter an ISDN ISP number,
ISDN number
OR
- to enter an analogic number,
Analogue No.
,
then press .
Contact your ISP to know what type of number you
should select.
disconnection: allows you to select an inactivity
Auto
time period after which the phone automatically
disconnects (if a connection was is progress) from the
+ -
network. Press or
,
10min. and press to validate.
The lack of exchanges with the network (connecting,
sending an e-mail, disconnecting) defines the
inactivity time period leading to auto disconnection.
Login and Password were up to you when you
subscribed to your account. Enter them also as
defined.
E-mail server access
The menus described in this section feature settings
needed to connect to the e-mail server of your Internet
Service Provider (ISP) via your mobile phone. Most
Messages
-
to select:
to select a value from 3 to
parameters are communicated to you by your service
provider and must be entered as given.
,
1. Press , select
Messages
,
and press
Settings
2. Select E-Mail server
be completed are the following:
SMTP address, Login,
address.
• POP3 address: allows you to enter the IP or DNS
address of the POP3 server, which is used to
receive e-mails.
• address: allows you to enter the IP or DNS
SMTP
address of the SMTP server, which is used to
send e-mails.
WARNING ! Network-dependent!
connection via GPRS, if your phone operator is not your
e-mail provider, contact your operator to get the correct
address of the SMTP server and enter it in this field.
In some cases, Login,
Password
up to you when you subscribe to your account. Enter
them as defined.
Account name
This menu allows you to rename the available e-mail
accounts.
> >
E-mail E-mail 1
.
,
and press . The fields to
POP3 address,
and
Password E-Mail
For an e-mail
and
E-mail address
>
are
47