Setting The Output Level - Akai GX-77 Operator's Manual

Setting the Output Level
An OUTPUT control has been supplied on this deck to match the
deck's output level to the outputs from other sources such as your
tuner or turntable, etc. Please adjust as follows:
1.
Set the Input selector on the external amplifier to Tuner,the Monitor
selector to Source and listen to an FM broadcast.
2. Adjust the amplifier's volume for normal listening.
3. Record as much of the FM broadcast as required on to this deck.
CUE/REVIEW Operation
Use the CUE/REVIEW lever to find the beginning of a song during
playback.
1,
2.
Press down the CUE/REVIEW lever.
If the tape is travelling in the forward direction ( ™ indicator is lit):
Press the Fast Forward (™) button. The deck will advance and
at the same time playback the tape quickly in the direction of
the arrows (> } .
Press the Rewind ( «4 ) button. The deck will advance and at
the same time playback the tape quickly in the direction of the
arrows ( «ea ).
lf the tape is travelling in the reverse direction ( «¢ indicator is lit):
11
. Set the Monitor selector on the external amplifier to Tape and
listen to the playback.
Compare the volume of the recording with the FM broadcast and
: alter the deck's OUTPUT control until they are the same.
Press the Fast Forward ( ™® ) button. The deck will advance
and at the same time playback the tape quickly in the direction
of the arrows ( >),
Press the Rewind ( «4 ) button. The deck will advance and at
the same time playback the tape quickly in the direction of the
arrows ( << ),
. When the desired section is reached, press the Stop ( a) button.
. To resume playback, push in the CUE/REVIEW lever to release
the operation.
5. Press the Forward ( ™ ) or Reverse ( « ) button.