Advertisement
R
epair
CAUTION: Remove the recipro saw blade and battery cartridge from the machine
for safety before repair/ maintenance !
[1] NECESSARY REPAIRING TOOLS
Code No.
Description
1R146
L type Torx wrench M6
1R232
Pipe 30
1R242
Round bar foe arbor 13-100
1R250
Round bar foe arbor 26-100
1R267
Spring pin extractor 2.5
1R269
Bearing extractor
1R291
Retaining ring S and R pliers
1R296
Spring pin extractor 1.5
1R314
Torx bit VT-25
---
Recipro saw blade
[2] LUBRICATION and ADHESIVE
Lubrication:
Apply Makita grease FA No.2 to the following portions designated with the black triangle to protect
parts and product from unusual abrasion. (Fig. 1)
Adhesive:
When reusing threadlocker coated screws, be sure to apply adhesive before tightening.
Recommended adhesives are ThreeBond 1321B or 1342, or Loctite 242.
Item No.
Description
6
Shoulder pin 5
17
X ring 14
Slider complete
29
Gear assembly
38
Flat washer 14
40
Gear housing complete
46
Fig. 1
Blade clamp section
Driving sleeve
Removing Shoe guide
Removing/ installing Needle bearing 1012
Removing/ installing Needle bearing 1012
Press-fitting Oil seal 14
Removing Shift button
Removing Ball bearing 6001DDW
Removing/ installing Retaining rings S-18 and S-12
Removing Pin 3 from the Blade clamp section
Removing/ installing Torx socket head screw
Assembling Pin 3 to the Blade clamp section
Portion to lubricate
Pin head that contacts Driving sleeve
Inside surface that contacts
Surface that contacts Plane bearing 14A
Surface that contacts Needle bearing 708 (Put approx. 7g.)
Surface of crank pin that contacts Needle bearing 708
Surface that contacts
Gear assembly
Pin 10 (the gear shaft for Gear assembly)
Gear room (Put approx. 10g.)
Plane bearing 14A
Needle bearing 708
Use for
Slider complete
Gear housing cover complete
Plane bearing 14A
P 2/11
Advertisement
