Table of Contents
Advertisement
b. Tone
color selection
when
using
the Memory Cartridge
The supplied Memory Cartridge M-16C can expand the
memory capacity by another 32 patch programs.
Memory Cartridge Mode
OPERATION
" is shown at the left of
in the Internal Memory mode, but note that the
Bank 5 to 8 are not available.
Display windows will flash.
The previous tone color remains until you select a
tone color in the step 2).
NOTE
The memory capacity of the Cartridge is 32 tone colors.
That is, while in the Cartridge memory mode (the Dis-
play shows "
С
`), the available tone colors are 32 in
the Banks 1 to 4. If you try to select the irrelevant Bank
numbers 5108 (if pressing the Bank Pedal and the Num-
ber Pedal 5 to 8), "C " will change to " Er c - and
returned to the previous display. !f this happens, select
the tone color in an appropriate bank 1 to & Until you
select a new tone color, the previous one remains.
APPLICATION
It is possible to use the Memory Cartridge that stores
the tone colors synthesized on the JX-8P Roland poly-
phonic synthesizer. Take the following operation.
OPERATION
@
Insert the Memory Cartridge of the JX-8P to
the Memory Cartridge Holder Ө on the GR-77B.
ә
Set the Protect Switch on the Memory Car-
tridge to the OFF position.
$i
Press the Cartridge Pedal ©, make sure that
" Ü
"isshown at the left of the Display win-
dow €, and set the Protect Switch to the ON
position.
e
Change the tone colors in the same way as
show in "Memory Cartridge Mode"
steps 1)
and 2).
*
The JX-8P's Memory Cartridge used for the GR-77B
will work properly on the JX-8P.
Advertisement
Table of Contents
