Incase Of Difficulty; Specifications - Kenwood DP-M5560 Instruction Manual

In case of difficulty
What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the
table below to see if the problem can be corrected before seeking help from your dealer or service representative.
Symptom
No power is applied with the POWER e Power plug is loosely connected,
switch ON.
@ Insert the power plug firmly into the AC
outlet.
@ Jurn the amplifier's power ON. @ With the power plug connected to the
switched AC outlet of an amplifier, the
power of the amplifier is turned off.
® Load the disc again with its iabel side up.
® Insert the disc properly.
@ Wipe off the dust an the surface of the
disc referring to "Disc handling precau-
tions".
@ Replace the disc with a new one.
@ Leave the player for about 1 hour so that
the condensation is removed.
@ Disc is loaded upside down.
@ Disc is loose.
@ Disc is dirty.
Disc is loaded, player does not play.
@ Disc is cracked.
@ Condensation occured on the optical lens
Unit.
@ Load a disc,
@ Press the key.
@ Wipe off the dust on the disc surface
referring to "Dise handling precautions".
@ Replace the disc with a new one.
@ Connect all connection cords firmly.
@ Disc is not loaded.
e Play mode is not entered (The play/pause
indicator is not lit}
e Disc is too dirty.
@ Disc is cracked.
@ The connection cords are inserted locsely.
No sound.
@ Wipe off the dust on the disc surface
referring to "Disc handling precautions".
@ Replace the disc with a new one.
@ Try selecting a place where no strong
vibrations occur by changing the installa-
tion place, etc.
Music is interrupted, (Sound is skipped.) @ Disc is too dirty.
Play begins as soon as the power is
turned on.
Notes:
1. This system is microprocessor-controlled, so malfunction may occur due to external noise or interferance noise. in such a case, unplug the power
cord, plug it and turn power on again.
2. Da notuse contact cleaners because it could cause a malfunction, Be specially careful against contact cleaners containing oil, for they may deform
the plastic components.
@ Disc is cracked.
@ Oscillation is applied to this unit.
® If automatic play is not required, remove
the disc or the magazine from the player
before turning the power OFF.
@ This untt is designed so that play begins
automatically when the power /s turned on
if a disc or a magazine Is already loaded,
Specifications
[Format] Channel separation ............ More than 90 dB {at 1 kHz)
System ...........:05 .. Compact disc digital audio system Wow & flutter .....0....:.ccsseeessneeesenns Unmeasurable limit
LASED .oreseseteteistessnereenertesesess SEMIiconductor laser Output level/impedance
Number of channels ..................ccscceescenseveeeree 2 channels IMG soccer tase ncaa esta ad ei eee 2.0 V/3.3 kQ
playing rotation .............. sore 200 rpm ~ 500 rpm (CLV)
[D/A Converters] [General]
D/A COMVETSION ......1..sssssssssssercereversereeerreazesannereseensnas 1 Bit Power CONSUMPTION ...........:ccseeeet seer 15 WH
[Audio] D: 360 mm (14-3/16")
Frequency response Q........c000222 8 Hz ~ 20 kHz + 1.0 dB WVGIQKE (GE) eiccssecnsiadacccctccisawcancieitncevacenwns 5.4 kg (11.9 Ib)
Signal to noise ratio oo... ecco teres ees More than 96 dB
Dynamic range .........22...0.1..s.02ece More than 94 dB
Total harmonic distortion
Less than 0.005% (at 1 kHz}
Note: ioe
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
16 pP.msseo / DP-M3360 (En)