System Connections 20.0.0 - Kenwood KX-79CW Instruction Manual

System connections
KX-79CW
REC/LINE IN jacks
PLAY/LINE OUT jacks
LINE (N= LINE OUT
REC PLAY
{MONITOR
REC PLAY
Turntable
System control connection (Except for some
areas.)
When connected to an amplifier or receiver having KENWOOD
SYSTEM CONTROL terminals, system operation such as remote
control is made possible. For details, refer to the instruction
manual of the amplifier or receiver.
If your amplifier or receiver is not equipped with the SYSTEM
CONTROL Terminals, do not connect anything to any SYSTEM
CONTROL Terminal.
ed properly, the automatic system governing remote con-
trol and system functions will not operate.
System control cord
To AC outlet
SYSTEM
CONTROL
CD player
Notes: — —— -
1.
2.
Connect all cords firmly. If connections are loose there could
be loss of sound or noise produced.
When plugging and unplugging connection cords after con-
nections are complete, be sure to first remove the power cord
from the AC outlet. Plugging/unplugging connection cords
without removal of the power cord can cause malfunctions
or damage to the unit.
KX-79CW (En}