System Connections; Audio Cord - Kenwood KX-7050 Instruction Manual

System connections
Make connection as shown below. When connecting the related system components, refer also to the instruction manuals
of the related components.
Do not plug in the power lead until all connections are completed.
Audio cord
To amplifier SWITCHED AC outlet
SYSTEM __
'CONTROL
Turntable
CD player
STAND BY mode of POWER switch
When the power cord of this system is plugged into an AC outlet,
the STAND BY indicator lights up regardless of the ON/OFF setting
of the POWER switch. This indicates that a small amount of current
is being supplied to the unit to back up the memory contents. This
mode is referred to as the Stand By mode.
Notes:
1. Connect all cords firmly. !f connections are loose there could be loss of sound or noise produced.
8B kx-7050/Kx-7050S (En)