Pioneer PD-F906 Service Manual page 46

PD-F906
@ REMOVING THE ARM (A)
Remove the float base together with the Servo
Mechanism ASSY GM. (Refer to Steps ©-© for
"Wi Removing the Servo Mechanism ASSY GM" .)
@-3)
Remove the clamp spring and remove the clamper holder.
Tum gear pulley (B) and position Arm (A) as shown
(8) below.
(9) Remove the Arm A spring2 from its hook.
Note: Do not hold the tip (blade) of arm (A) during
operation.
Gear Pulley (B)
Tum gear pulley (B) and position Arm (A ) as shown
below.
6) Remove Arm (B) while pressing the hook in
3 the direction of the arrow.
46