Panasonic AW-RP301 Operating Instructions Manual page 16

e Changing Switch Settings on Pan/tilt Head
(D Remove the cover from the pan/tilt head.
* Be careful of the Tally indicator wire.
Tally Indicator
|
\
S
(2 Shift the mounting direction switches (SW1, SW2) on
the panftilt head depending on whether the head is
suspended from the ceiling or mounted on the floor:
They are originally set for suspended installation.
* Do not shift SW3, which is originaliy set to P/T CON-
TROL SERIAL. If SW3 is shifted from the original posi-
tion, no operations can be controlled from the control
panel.
-14-
(3 Place the cover back on the pan/tilt head.
* Be sure not to trap the wires.