Over Inflation And Temperature Regulation - Advanced Elements ADVANCEDFRAME ELITE Owner's Manual

®
STEP 2 :
1. Moving to Main Chamber 2 on the inside of kayak, check to be sure that the valve plunger is
(2.0 psi ONLY).
alve.
STEP 3 :
MAX)
4. Make sure all valves are closed tightly and properly.
5. Finally, insert plastic Bow and Stern Forms into the grey pockets on the bow and stern of the
kayak. (See Figure 3).
Figure 3. Plastic Bow and Stern Insert
INFLATION TIPS
CO2, OR COMPRESSED AIR AS THEY MAY DAMAGE YOUR KAYAK. The main chambers use
high-end military style, plunger valves (Push in and twist to activate the spring-loaded check

3.4 OVER INFLATION AND TEMPERATURE REGULATION

weather and water your kayak will lose some pressure. If this occurs, you may want to add a
bit more air to the kayak to improve performance. In hot weather or prolonged sunlight, the air
inside the kayak will expand. You must let some air out of the appropriate chambers to prevent
the kayak from failing due to overpressure. You should avoid exposing your kayak to extreme
temperatures (hot or cold).
11