Inflation And Setup In 3 Simple Stages - Advanced Elements ADVANCEDFRAME ELITE Owner's Manual

3.3 INFLATION AND SETUP IN 3 SIMPLE STAGES

For the best setup experience, we recommend using the Advanced Elements Double Action
Hand Pump with Gauge (AE2011) which provides 4,000 cc's per full cycle stroke.
two separate air chambers that encircle the entire kayak. This provides optimum safety when out
air into the two main chambers, not only for proper performance, but for safety as well.
STEP 1 :
1. Starting with Main Chamber 1, check to be sure that the valve plunger is UP or in the
INFLATE position (See Figure 1 on previous page).
down) strokes until the kayak begins to take shape. If using another pump, the key here is to
minimal amount of air pressure.
DO NOT PUT ALL OF THE AIR PRESSURE IN THIS CHAMBER.
Main Chamber 2.
10
alve and proceed to