Main Features; Recorder Section - Fostex DMT-8VL Owner's Manual

Digital multitracker
Hide thumbs Also See for DMT-8VL:
Table of Contents

Advertisement

DMT-8 Owner's Manual (Main features of DMT-8v1)
Main Features
of DMT-8v.
'The DMT-8v1 is equipped with the following functions:
«Recorder Section»
High-quality sound, non-compressed, eight track digital hard disk
recorder
* Instead of conventional cassette tape, the DMT-8v: is equipped with a
dedicated 3.5 inch EIDE type hard disk as the recording media, allowing
for about 12 minutes (when installing the 540MB hard disk unit) or
about 30 minutes (when installing the 13GB hard disk unit) of recording/
playback.
+ Non compression
recording method, with 16-bit linear quantization and
a sampling rate of 44. ЛКН, which enables you to record and playback
high quality sounds that are approximately equivalent to CD quality.
Managing up to five programs using the Program Change function
* Using the Program Change function allows you to record, playback, and
dit up to five songs individually on the hard disk.
In this way, you can utlize the hard disk to manage different programs
at any time, without the necessity of archiving (backing up) data to an
external DAT machine. (Refer to pages "36" and "S0" for more details.)
Versatile editing functions are made possible by the hard disk
* The DMT-8vi allows you to use non-linear, non-destructive audio editing
functions, such as copy & paste, move & paste, cut, and erase.
These edit operations can refer not only to time values such as ABS and
MIDI timecode, but to MIDI bar /beat/clock values. (Refer
to page "93"
for details)
* You need only one action to monitor the copied audio data using the
Clipboard
Play function. (Refer
to pages "96" and "101" for details.)
* The Over Time Monitor function lets you know the overtime length
when you try to copy & paste or move & paste data in excess of the
currently available disk space. (Refer to page "31" for details.)
Undo/Redo
function to support edit works
* The Undo/Redo functions will cancel the latest edit and restore the data
obtained before the edit, or restore the data obtained after the edit
respectively. (Refer
to pages "82, 98, 103, 106 and 107" for details.)
* The Can't Undo function provides you with an alarm indicating that the
undo area is insufficient for the Auto Punch In/Out operation. (Refer to
page ^31" for details.)
'Song data Save/Load function
* You can save recordings (audio data plus corresponding setup data) of
each Program individually or all Programs simultaneously to an external
DAT machine. You can also load a set of data to a desired Program.

Advertisement

Table of Contents
loading

Table of Contents