Table of Contents
Advertisement
DMT-8v1 Owner's Manual (SETUP mode)
15. Setting Slave mode On/Off ("SLAVE")
The "SLAVE" option in the Setup mens allows you to turn Slave mode on and off.
When this mode в on, the ОМТ ВИ wi be abie to synchronize the МТС (MIDI time
собе) sent from the master ОМТ-8 ver2.0 (or D-80). (Along
with the МТС, the
master DMT-8 ver 20 (or 0-80) wil send digital signals to the slave DMT-8vL. as a
reference). This setting s effective only а the selected Program and will be
maintained
after you turn off the pomer.
1. Pross the STORE key while pressing and holding down the HOLDI> key to select
4 Use the JOG dis to select "OFF or "on.
Turning the JOG ёш counter cocks i select "OF and turning дрон wll
КА
'5 Press the EXECUTE/YES
key again.
The display in Sp 2 wil appear, and he scing is complete
IE
| Donat сотен or дили he орош cable 1o or om ® DATA IN connector мө
'the рин пра а rud toan Wack. Obere, те ОМТ.®л may generate ree,
пао
Ре enema атка
6. Press the STOP button or the EXITINO key to quit Setup mode.
чат
Те MT ени an конти уш эм wel а эл ее MTC tor а ае срео.
тете. connect те DATA OUT ветна и mas 0.80 ОМТ he DATA
Мет c бе вате unt ung an срем cable (You do nt төө 1o эн any cher
'tanga on те master ont, soe Ре master мез DATA OUT conector amaya outputs
зра муш)
It you hve not connate he units a Sacred above (or in те slave nt oes not
receive а pais corecy for sorne reason, Pa "DIGITAL indenter ol e slave
re à birk саарал ато
133
Advertisement
Table of Contents
