Recording From Another Tape (Dubbing) - Sony LBT-N355 Operating Instructions Manual

20
ae ae eee
Recording from
Another Tape
(dubbing)
Dubbing Another Tape
Automatically
You can record an entire tape onto another
automatically by using high speed dubbing.
Use the buttons on the unit and TYPE I
(normal) or TYPE U (CrOz2) tapes for dubbing.
SYSTEM
POWER > ON
NuW Bs
1 Press FUNCTION repeatedly until
"TAPE" appears in the display.
2 Press & EJECT and insert a recorded
tape in deck A with the side you want to
play facing forward.
Also, insert a blank tape in deck B with
the side you want to record on facing
forward.
Recording and playback will start from
the front side of the tape, unless you
change the playing direction before
recording. '
Make sure the tabs on the cassette in
deck B have not been removed.
3 Choose how you want the tape to record
and press DIRECTION repeatedly until
the desired mode appears.
Position Operation
= Dubbing stops at the end of
one side
ct) When the tape in one deck
comes to the end of the front
side, it reverses immediately
regardless of the tape
position in other deck.
RELAY When the tape in one deck
reaches its end of the front
side, it stops until the other
tape come to its end, and then
both tapes reverse together.
Chapter 4: the Tape Player
4. Press HIGH SPEED DUBBING.
The REC and Ol (pause) lamps light and
deck B stands by for recording.
The > lamp lights and the <I] lamp
flashes for a few seconds, then disappears.
ow | cal Side in recording
pause mode
If you want to start recording from the
reverse side, press <<J so that the <2)
lamp lights steadily.
5 Press ll on the tape player.
The tape player starts dubbing at high
speed.
If you set DIRECTION to (=) or
RELAY, recording always stops at the
end of the reverse side.
To stop dubbing
Press CJ on deck A or deck B.
If you select another sound source while
dubbing
Dubbing stops.
You do not have to press DOLBY NR with
high speed dubbing
The tape in deck B is automatically
recorded in the same state as the tape in
deck A.
Dubbing Another Tape
Manually
When you want to dub only part of the
tape, dub manually at normal speed. Use
the buttons on the unit and TYPE I (normal)
or TYPE II (CrOz) tapes for recording.
SYSTEM
POWER~ ON
1 Press FUNCTION repeatedly until
"TAPE" appears in the display.
2 Press & EJECT and insert a recorded
tape in deck A with the side you want to
play facing forward.
Also, insert a blank tape in deck B with
the side you want to record on facing
forward.
Recording and playback will start from
the front side of the tape, unless you
have changed the playing direction
before recording. ;
Make sure the tabs on the cassette in
deck B have not been removed.
3 Select dual or single-sided recording.
Press DIRECTION
To dub
to select
One side ofthetape ==
Both sides* C=) or RELAY
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
4 Press REC.
The REC and 00 (pause) lamps light and
deck B stands by for recording.
The C> lamp lights and the <J lamp
flashes for a few seconds, then
disappears.
os | Cee
|
Lah)
Side in recording
pause mode
If you want to start recording from the
reverse side, press <J so that the <1]
lamp lights steadily.
5 Press 0 on the tape player to release
recording pause on deck B.
Recording starts on deck B.
If you set DIRECTION to C=) or
RELAY, recording always stops at the
end of the reverse side.
6 Press <J or E>.
The tape on deck A starts playing.
To stop dubbing
Press 0 on deck A or deck B.
Notes
e When dubbing tapes originally recorded
with Dolby NR B, the dubbled tape is
automatically recorded with Dolby NR B.
¢ When you want to record a tape recorded
without Dolby NR B onto another tape
using Dolby NR B, press DOLBY NR so
that "DOLBY NR B" appears in the
display.