Table of Contents
Advertisement
Installation of the CRT
Note: The replacement CRT is supplied as an assembly, comprised of the CRT and the inner Lens, with the space between
them filled with ethylene glycol. Care should be taken during handling and installation to prevent shock from disrupting
the seal or alignment between the CRT and Inner Lens. [Fig. 6-3]
Inner Lens
Fig. 6-4
1. Carefully position the replacement CRTs and fasten in place, using 4 screws @ as shown in Figs. 6-5 and 6-6.
Optical Unit
CRT(R)
CRT(G)
CRT(B)
Fig.6-5
Advertisement
Table of Contents
