Table of Contents
Advertisement
ELECTRICAL ADJUSTMENTS
Perform only the adjustments required.
If proper equipment is not available, do not attempt an alignment.
(JMeasuring equipment and Jigs |
* Oscilloscope (Unless otherwise specified in particular, use 10:1 probes)
* Signal generator
* Frequency counter
* DC voltmeter
* Multiplex audio signal generator
- DC ampere meter
* Electrical tools
* Cable extension kits (Part No.859C431060, 8590431070 and 859C612010)
CJTest signal
1. Monoscope signal
:
When you have no monoscope signal source for adjustment, connect the unit to a VCR and play an alignment
tape(Monoscope).
2. Color bar signal
In this manual, unless otherwise specified, use the color bar signal specified below.
NTSC
Split-Field Color Bars (with 100% window)
43%
Advertisement
Table of Contents
