pTron Funk Duet User Manual

Important : pTron 'Funk Duet ' speaker is set at 50% default volume. You can increase the volume through the
Speaker or through the connected device.
Getting Started & Charging:
i. Unbox the Speakers and remove all packaging materials.
Place the speakers on a flat surface.
ii.
iii. Connect the Micro USB cable to the charging port on the speaker's backside, and connect the USB end of the
Charging cable to a Power Source such as a USB Charger or other Charging Devices with a 5 volt output.
iv. Charge the speakers fully before initial use for the best battery performance.

Bluetooth Pairing:

i. Turn on the speakers by long-pressing the power key.
ii. The speaker will enter pairing mode automatically. The Bluetooth indicator light will start blinking.
iii. On your smartphone or tablet, enable Bluetooth and search for nearby devices.
iv. When you see "pTron BT speaker" in the list of available devices, select it to pair.
v. Once connected, the Bluetooth indicator light will become solid, indicating a successful pairing.
Note: If no device is connected within 5 minutes after turning on the speaker, the Speaker will automatically turn off.

Basic Operation:

Power on/off: Turn on/off the speakers by long-pressing the power key.
i.
ii. Volume control: To increase the sound, long-press the "+" button. and for sound decrease, long press the "-"
button.
i. Play/Pause: Press the play/pause button to start or pause audio playback.
ii. Next/Previous track: Press the "+" button once to move to the next song, and press the "-" button once for the
previous track when playing music.
Note: The speaker will automatically detect the TF card, Aux cable and USB drive after inserting these devices.

TWS function:

i. This speaker comes with auto-detecting TWS technology, so when two speakers turn on within proximal range,
they will automatically connect to each other.
Funk Duet
Wireless Speaker - User Guide