Table of Contents
Advertisement
- Immediately after opening the parachute it is necessary "to kill" the canopy of the paraglider to avoid the "bell"
regime. To do this, tighten the B- or C-risers of the glider rmly and deeply. If this is not possible, you need to
deeply tighten the brakes of the paraglider until it enters a complete stall;
- when descending under the canopy of a rescue parachute, it is necessary to control the height and the environ-
ment. Before touching the ground, you need to take the right position - take the maximum "standing" position in
the harness, bend your knees, tighten the muscles of the legs, abs and back to absorb the impact energy;
- to avoid the injury, always try to land on your feet;
- after landing in a strong wind, you need to kill the canopy of the parachute by tightening either one main (side)
line, or the central line.
ADJUST AND FIT THE HARNESS
The harness Runa is available in four sizes, each designed for a speci c pilot's height (see "Speci cations"). For a
more precise adjustment for a speci c pilot, we recommend using a simulator. Adjustments must take into
account not only height, but also the shape and proportions of the pilot's body. When choosing the backrest
angle, take into account the individual piloting style and your own preferences.
12
Advertisement
Table of Contents
