Watch A Connected Device - Philips 32PDL7906M User Manual

[Movie]: Ideal settings for movies.
•
[Game]: Ideal settings for games.
•
[Drama]: Ideal settings for drama
•
programs.
• [Sports]: Ideal settings for sports.
Change picture format
Change the picture format to suit your
preference.
ADJUST.
1. Press
2. Select [Picture format], then press OK.
3. Select a picture format, then press OK to
confirm.
The available picture formats depend on the
video source:
[Auto fill]: Adjust the picture to fill the
•
screen (subtitles remain visible).
Recommended for minimal screen
distortion but not for HD or PC.
[Auto zoom]: Enlarge the picture to fill
•
the screen. Recommended for minimal
screen distortion but not for HD or PC.
[Super zoom]: Remove the black bars
•
on the sides of 4:3 broadcasts. Not
recommended for HD or PC.
• [Movie expand 16:9]: Scale 4:3 format
to 16:9. Not recommended for HD or
PC.
[Wide screen]: Stretch 4:3 format to
•
16:9.
• [Unscaled]: Provide maximum detail for
PC. Only available when PC mode is
enabled in the picture menu.

Watch a connected device

Add new device
Notes:
• Before you watch a connected device,
you must add its icon to the Home
menu. See Connect your TV >
Connect device (Page 45).
• If you connect an HDMI-CEC
compliant device to the TV through an
HDMI connector and switch it on, the
device is automatically added to the
Home menu.
EN 16
1. Connect and switch on the device.
2. Press .
3. Select [Add your devices], then press
OK.
4. Follow the onscreen instructions.
•
Select your device.
•
Select the connector.
Note: If you are prompted to select the TV
connection, select the connector that this
device uses.
Select a source
From Home menu
After you have added the new device to the
Home menu, select the new device icon to
view its contents.
1. Press .
2. Select the device icon from the Home
menu.
3. Press OK to confirm.
From Source menu
You can also press
list of connector names. Select the
connector that connects the device to the
TV.
1. Press SOURCE.
2. Press the Navigation buttons to select a
connector in the list.
3. Press OK to confirm.
Remove device
You can remove device icons that are not in
use.
1. Press .
2. Select the device icon from the Home
menu.
OPTIONS, then select [Remove
3. Press
this device].
4. Select OK to confirm.
SOURCE to display a