Table of Contents
Advertisement
4 Use Your TV
Switch on/off the TV or switch it
to standby
Switch on the TV
If
indicator is off, plug the TV power
the
cable into the power socket. Press the
on-off key of the TV to the ON state as
shown in the figure.
If the indicator is turned on, please press
(Standby-On) on the remote control or
key on the TV.
Switch the TV to standby if it is on.
Press
(Standby-On) on the remote
control. The "Standby" indicator is turned
on.
Switch off the TV.
Press the on-off key on the back of the TV
to the OFF state shown in the figure. The
"standby" indicator is turned off.
Tip
Though the TV consumes very little
power when in standby mode, energy
continues to be consumed. Disconnect
the TV power cable from the power
outlet when the TV is not used for an
extended period of time.
Watch content on connected
devices
Note
Switch on the device before selecting it as
an external source.
Use the Source button
1. Press SOURCE key. The source list appears.
2. Press ▲/▼ key to select a device.
3. Press OK key. The TV switches to the
selected device.
8
EN
Advertisement
Table of Contents
