Table of Contents
Advertisement
What you need
To enjoy MHP interactive services, you need
the following:
•
digital channels with interactive services
•
a wired or wireless home network,
connected with a Universal Plug and
Play router (uPnP).
For network connection, see Setup your TV
> Computers and the Internet (Page 52).
To find out what interactive services are
available, contact your broadcasters.
Access application
1. Switch to a channel with digital TV
interactive services.
A blinking symbol is displayed when the
application is loading. Once complete, an
icon is displayed.
2. Press the Red button to launch the
interactive application.
3. Follow the onscreen instructions to use
the application.
4. Press EXIT to exit.
Note: If the MHP application does not load,
enable MHP auto-start. See Use your TV >
Use Multimedia Home Platform > Auto-
start (Page 25).
Select application
If the application you want to access does
not load, the channel might have two or
more MHP applications. Disable Auto-start
and select the application you want to
access.
1. While you are watching the channel, press
OPTIONS.
2. Press Navigation buttons to select [MHP
applications], then press OK.
A menu is displayed.
3. Select [Disable MHP auto start], then
press OK.
Auto-start is disabled, and the list of
applications in the menu is enabled.
4. Select an application, then press OK.
The selected application starts to load.
Auto-start
If you switch to a channel with an MHP
application, the interactive application starts
automatically. You can disable or enable this
automated behaviour.
1. While you watch an MHP channel, press
OPTIONS.
2. select [MHP applications], then press OK.
3. Select [Disable MHP auto start] or
[Enable MHP auto start], then press OK.
Auto-start is disabled or enabled.
EN
25
Advertisement
Table of Contents
