Table of Contents
Advertisement
(Standby-On) on the remote control or
key on the TV.
Switch the TV to standby if it is on.
Press
(Standby-On) on the remote
control.The "Standby" indicator is turned on.
Switch off the TV.
Press the on-off key on the back of the TV
to the OFF state shown in the figure.The
"standby" indicator is turned off.
Tip
Though the TV consumes very little
power when in standby mode, energy
continues to be consumed. Disconnect
the TV power cable from the power
outlet when the TV is not used for an
extended period of time.
Watch content on connected
devices
Note
Switch on the device before selecting it as
an external source.
Use the Source button
1. Press SOURCE key.The source list appears.
2. Press ▲/▼ key to select a device.
3. Press OK key.The TV switches to the
selected device.
Switch channels
Switch channels without Using Channel list:
Press CH+/CH- key on the TV or the
remote control.
Enter a channel number using the numeric
buttons on the remote control.
Press the
control to return to the previous channel.
Switch channels Using Channel list:
You can use the channel list to watch all available
channels.
1. Press OK key.The channel list appears.
2. Press ▲/▼ key to select a channel.
3. Press OK key to watch the selected
channel.
4. Press the
previously watched channel.
EN 8
(Back) key on the remote
(Back) key to switch to the
Advertisement
Table of Contents
