Table of Contents
Advertisement
3. Preparation
3.2 Using the display
3.2.1 Main monitor - display information
Image viewing screen
A
1
1
B
Status icons (page 12)
Soft key icons (page 11)
Status icons (main monitor)
Indicates which doorphone is calling,
1
monitoring, or on a call.
("1" indicates the device number.)
Indicates there is a call from the doorphone
when monitoring or on a call with another
device (page 21).
Indicates that the main monitor is on a call.
Indicates that a doorphone and a PBX
extension are talking.
Indicates that the main monitor is
monitoring.
Indicates that images are being recorded
(page 18).
Indicates that the doorphone's LED lights
are on (page 22).
Indicates that "Press-to-talk" mode is on
(page 16).
Information screen
The information screen can be displayed by pressing
M
N when the main monitor is idle. The information
screen is used to display information such as the current
status of the main monitor.
12
P
P
3.2.2 Sub monitor - monitor display
Image viewing screen
The following display is an example for description
purposes, and it may differ from the actual display.
R The monitor display is turned off during standby.
When you press M
appears.
A B C DEFG
H
I
J
Indicates the battery level
Estimated operating time after charging
the battery for 7 hours.
(When surrounding temperature is 20 °C)
¯
R Continuous operating time:
Approx. 2.5 hours
R Standby time: Approx. 200 hours
(When the sub monitor is off the charger
and is not in use after the battery is fully
charged.)
– While "OUT OF RANGE" is displayed
¯
(page 13), the standby time is
shortened.
Recharge the battery immediately.
R While in use:
2 beeps sound every 4
seconds and a call is
disconnected within about
60 seconds.
R During standby:
"RECHARGE BATTERY" is displayed.
(The battery needs to be recharged.)
Indicates which doorphone calling, monitoring, or in
a call. Also indicates which doorphone took the image
while viewing it.
Example:
Doorphone 1
N, the information display
(flashing)
Advertisement
Table of Contents
