Table of Contents
Advertisement
Wide mode
(default setting)
Images are not zoomed.
The full camera image is
displayed.
Note:
R The zoom feature uses a digital zoom. As a result,
the image quality of zoomed images is lower than
wide display images.
R You can switch between wide and zoom modes and
adjust the zoom position while monitoring or on a call.
See page 22.
Selecting wide or zoom
N ® select "Initial settings" ®
1. Press M
.
2. Select "Wide/Zoom settings" ®
R If there are multiple doorphones, select the
doorphone to be configured ®
3. Select the desired setting ®
– "When visitors come": Your settings will be
used when you answer calls from visitors.
– "When monitoring": Your settings will be used
when you are monitoring.
4. Select the desired display mode ®
R A beep sounds and the settings are changed.
5. When finished, press M
Note:
R If you select "Zoom", adjust the zoom position so that
people or objects that you want to view are displayed
centrally in the screen.
R When images are recorded in zoom mode, only the
zoomed area is recorded.
Selecting the zoom position (pan/tilt position)
You can select which area of the image is displayed
when displaying zoomed images.
N ® select "Initial settings" ®
1. Press M
.
2. Select "Zoom position settings" ®
R If there are multiple doorphones, select the
doorphone to be configured ®
R A zoomed image from the doorphone is
displayed.
3. Select the desired zoom position ®
R A beep sounds, the settings are changed, and the
display turns off.
Note:
R If you do not perform any operations for 90 seconds
while changing this setting, the setting is cancelled
and the screen turns off.
Zoom mode
Images are zoomed.
Images are displayed 2
times larger than wide
display.
.
.
.
.
N.
.
.
.
3. Preparation
15
Advertisement
Table of Contents
