Printing In Two Colors - Ricoh Priport JP1010 Operating Instructions Manual

I
Close the front door.
Note
Make sure that the Cover Open
indicator (M)turns off, and the
COLOR is shown in the guid-
ance display.

Printing In Two Colors

After printing in one color, you can
print in another color on the same
side of the print.
Important
Leave the prints for a while before
printing on them again to let the
ink dry.
If the prints are not dry, the paper
feed roller might become dirty. In
this case, wipe off the roller with a
cloth.
Note
You cannot print in two colors at
one time.
A
Prepare the two originals. Set the
first original on the exposure
glass.
Color Printing Using The Optional Color Drum
B
Press the { { { { Start} } } } key.
C
Check the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the {Image
Position} keys (see ⇒ P.8 "Shift-
ing The Print Image Position For-
ward Or Backward") or the side
table fine adjusting dial (see ⇒
P.8 "Shifting The Print Image Po-
sition To The Right Or Left").
D
Enter the number of prints with
the { { { { Number} } } } keys.
GRPREP0E
2
TSLS012E
TSLS011E
51