Table of Contents
Advertisement
Center/Edge Erase—Erasing Center And
Edge Margins
When printing from thick books, or
similar originals, the binding margin
at the center and the edges might ap-
pear on prints. To prevent this, follow
the steps below.
Note
As a default setting, the paper sizes
and directions that can be used are
as follows:
Metric
B4L, A4L, A5K, A5L,
version
B5K, B5L
" × 14"L, 8
Inch
1
8
/
2
version
" × 8
1
1
5
/
/
"L, 5
2
2
If you want to use other size origi-
nals, you can register the size using
Service Program mode (See ⇒ P.55
"Service Program Menu").
The margin width to be erased can
be adjusted with Service Program
mode (See ⇒ P.55 "Service Program
Menu").
A
Press the { { { { Center/Edge Erase} } } } key
twice to select the Center/Edge
Erase mode.
Center/Edge Erase—Erasing Center And Edge Margins
GRMARG0E
B
" × 11"L,
1
/
2
" × 8
1
1
/
/
"K
2
2
Check Indicator is blinking and
is shown in the guidance dis-
play.
Note
To cancel this mode, press the
{Center/Edge Erase} key again.
Press the { { { {
} } } } or { { { {
lect the paper size and direction.
1
TSLS01CE
} } } } key to se-
TSLS01DE
17
Advertisement
Table of Contents
