Dirt On The Front Side Of Paper (Black Line/Stain); White Prints Or Incomplete Prints - Ricoh Priport JP1010 Operating Instructions Manual

WHAT TO DO IF SOMETHING GOES WRONG
G
Turn on the main switch.

Dirt On The Front Side Of Paper (Black Line/Stain)

5
Note
When black lines or stains still appear on prints even if you clean the above,
contact your service representative.
If there is no margin or if there is a solid image area near the leading edge of
the original, make a margin of at least 5 mm, 0.2" at the leading edge. Other-
wise, the paper exit pawl might become dirty and cause black lines on prints.
Check the platen cover and clean it if dirty. (See ⇒ P.112 "Platen Cover".)
Check the exposure glass and clean it if dirty. (See ⇒ P.112 "Exposure Glass".)

White Prints Or Incomplete Prints

102
On
Off
O n
O f f
TSLH01RE
GRBLAC1E
GRWHIT0E