Advertisement
Euroscan IO data sending
parameters.
more in-depth information, please refer to
TK Touchprint/Touchlog I/O
To configure "Touchprint Reefer" I/O parameters select "TK Touchprint IO":
Data sending parameters (AVL ID) used for "Touchprint Reefer" are these: 10695 - 10703. For more
in-depth information, please refer to
Touchprint IO data sending
parameters.
Codec 8 Extended
should be selected as the main data protocol in the "Protocol Settings" tab, which
is located in the "System" section.
Advertisement
