FMB640. When entering Sleep or Deep sleep RS-232 will be powered off.
FMB640
RS-232
connection diagram is shown in the figure below:
Installation guide
TouchPrint/TouchLog
TouchPrint pinout:
No configuration is necessary.
If the equipment does not receive information from the thermographer, the speed of the port
accessing the configuration menu:
Keep the blue and red buttons pressed at the same time. "Enter PIN code" is displayed on the
screen, enter pin "1111" by pressing the blue button four times. Travel for the options with the red
button.
The ENG Display> OFF option must be ON, change its value with the keys ◄ and ►. Once switched
to ON, keep scrolling through the options until you find Baud Rate> 9600. The value should be 9600,
otherwise, adjust the speed by moving the cursor with the ◄ and ► keys, and adjust the speed with
the keys ▲ and ▼.
TouchLog pinout:
AVL IDs for Touchprint:
Parameter
Input
Input
Input
Input
Input
Input
Setpoint
Setpoint
Setpoint
name
1
2
3
4
5
6
1
2
3