TP-Link kasa smart KS205 User Manual page 7

Wi-fi light switch, single pole

Hide thumbs Also See for kasa smart KS205:

Wire Your Smart Switch

Step 1. Turn Off Power and Remove the Wallplate

Turn off the circuit breaker. Then remove the old wallplate of the wall

switch and label the wires.

CAUTION

Risk of Electric Shocks - High Voltage - Disconnect power supply at the circuit breaker before servicing.

MISE EN GARDE

Risque d'électrocution - Haute tension: débranchez l'alimentation électrique au niveau du disjoncteur avant l'utiliser.

Step 2. Disconnect wires from the old switch

Gently pull the switch out and disconnect wires from the old switch.

Step 3. Connect the Wires

Use the labels and wire nuts to connect the wires to the smart switch as

shown below. You can distinguish Ground and Neutral lines by their colors.

Note: No need to distinguish between Line and Load wires.

Table of Contents