Table of Contents
Advertisement
Quick Links
Safety information
WARNING:
•
Only install and use this product in accordance with applicable electrical codes and regulations
in your region.
•
This device is designed for indoor use in dry locations only.
•
The maximum current limit of the device is 15 Amps. Do not exceed the 15 Amps limit, as it may
cause damage to the device and cause it to no longer function.
•
Do not attempt to disassemble the product or make repairs yourself. Doing so may run the risk
of electric shock and will void the limited warranty.
•
If you require service, please contact our after sales services.
•
To disconnect the voltage, remove the IQ Smart Plug-PG from the wall socket.
•
Make sure to use this product together with a 15A circuit breaker.
• Figure 1: Do not plug smart devices into each other
D-308965 Rev 00
IQ Smart Plug- Installation Guide
D-308965 IQ Smart Plug-PG Install Guide
*D-308965*
D-308965
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for QOLSYS IQ Smart Plug-PG
Summary of Contents for QOLSYS IQ Smart Plug-PG
- Page 1 • If you require service, please contact our after sales services. • To disconnect the voltage, remove the IQ Smart Plug-PG from the wall socket. • Make sure to use this product together with a 15A circuit breaker. • Figure 1: Do not plug smart devices into each other...
-
Page 2: Installing The Device
Overview The IQ Smart Plug-PG lets you control your electrical appliances remotely through your control panel. For panels that are compatible with the IQ Smart Plug-PG, see https://bit.ly/3PwGRX1. Figure 2: Overview Table 1: Overview Callout Description Function LED indicator •... - Page 3 Ensure that the IQ Outdoor Plug-PG is powered on. On the IQ panel, tap Settings > Advanced Settings > Enter Installer Code > Installation > System Tests > PowerG Test > Run. IQ Smart Plug- Installation Guide D-308965 IQ Smart Plug-PG Install Guide...
-
Page 4: Resetting The Device
3 times to indicate a reset to factory default. Note: After a device is reset back to factory default, you must delete it from the panel and re-enroll the device. IQ Smart Plug- Installation Guide D-308965 IQ Smart Plug-PG Install Guide... -
Page 5: Troubleshooting
Ensure that the IQ Smart Plug-PG is not enrolled in other IQ panels. • Perform a factory reset on the IQ Smart Plug-PG. Delete the IQ Smart Plug-PG from the IQ panel and re-enroll it. The IQ Smart Plug-PG is not working with certain devices •... - Page 6 Read the safety information before you install the equipment. The IQ Smart Plug-PG shall be installed and used within an environment that provides the pollution degree max 2 and over voltages category II in non-hazardous locations, indoor only. This product is to be installed or used in accordance with local electrical codes and regulations.
-
Page 7: Technical Support
Limited Warranty and EULA To access Warranty and EULA information, access the following link: https://bit.ly/3PwGRX1 or scan the following QR code: Technical support Intrusion Tech support: +1- 855-476-5797 #2 or 1-800-387-3630 IQ Smart Plug- Installation Guide D-308965 IQ Smart Plug-PG Install Guide... - Page 8 ©2023 Johnson Controls. All rights reserved. JOHNSON CONTROLS, TYCO and DSC are trademarks and/or registered trademarks. Unauthorized use is strictly prohibited. www.johnsoncontrols.com D-308965 IQ Smart Plug-PG Install Guide...
Need help?
Do you have a question about the IQ Smart Plug-PG and is the answer not in the manual?
Questions and answers