QOLSYS IQ SMART PLUG QZ2101-840 Quick Install Manual

IQ SMART PLUG QUICK INSTALL GUIDE

DESCRIPTION

The Smart Plug is an intelligent device that

can be controlled remotely. Monitor voltage,

current, instant power or accumulated power

from your smart device.

LEARN

STEP

INTO

PANEL

Plug Smart Plug into an

outlet close to the panel

PLEASE NOTE: PAIRING THE IQ SMART PLUG NEAR THE IQ PANEL IS FOR CONVENIENCE ONLY. ONCE IQ SMART PLUG HAS

BEEN SUCCESSFULLY PAIRED IT CAN BE MOVED ANYWHERE WITHIN ACCEPTABLE RANGE (APPROX 100 FEET OPEN AIR)

Select "Add Device" under

Z-Wave device installation

This is a quick guide for experienced installers only. Refer to http://dealers.qolsys.com (login required)

Dimensions: 43MM x 43MM x 45MM

Input Voltage: 110-230VAC 50/60HZ

Max Current: 13A 

Rated Input Current: 

10A, 110-230V, 50/60Hz Continuous load current 

16A, 110-230V, 50/60Hz Instantaneous load current

Operating Temperature: 32°F~104°F

Storage Temperature: 32°F~140°F 

Range: Up to 195' outdoors, Up to 98' indoors

Press the button three times in

1.5 sec to "enroll" the device

Table of Contents

Do you have a question about the IQ SMART PLUG QZ2101-840 and is the answer not in the manual?

Page 1 PLEASE NOTE: PAIRING THE IQ SMART PLUG NEAR THE IQ PANEL IS FOR CONVENIENCE ONLY. ONCE IQ SMART PLUG HAS BEEN SUCCESSFULLY PAIRED IT CAN BE MOVED ANYWHERE WITHIN ACCEPTABLE RANGE (APPROX 100 FEET OPEN AIR) This is a quick guide for experienced installers only. Refer to http://dealers.qolsys.com (login required)
Page 2 FCC ID: 2ASYY-W335019A TechSupport@Qolsys.com Qolsys Product #: QZ2101-840 IC: 24969-S335019A This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.