thomann LED Music Stand Light Pro Quick Start Manual

LED Music Stand Light Pro

Safety instructions

Intended use
This device is intended to illuminate music stands. Any other use or use under other operating
conditions is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damage resulting from improper use.
This device may be used only by persons with sufficient physical, sensory, and intellectual abilities
and having corresponding knowledge and experience. Other persons may use this device only if
they are supervised or instructed by a person who is responsible for their safety.
Risk of injury and choking hazard for children!
Children can suffocate on packaging material and small parts. Children can injure
themselves when handling the device. Never allow children to play with the packag-
ing material and the device. Always store packaging material out of the reach of ba-
bies and small children. Always dispose of packaging material properly when it is not
in use. Never allow children to use the device without supervision. Keep small parts
away from children and make sure that the device does not shed any small parts (such
as knobs) that children could play with.
Incorrect handling of lithium batteries can result in injury!
In the event of a short circuit, overheating or mechanical damage, lithium batteries
can cause severe injuries. Handle lithium batteries in a correct and professional man-
ner. Store lithium batteries in a cool and dry place in their original packaging. Keep
lithium batteries away from sources of heat. Never open lithium batteries. Only charge
rechargeable lithium batteries with a suitable charger. Remove the lithium batteries
before disposing of the device. Cover the poles of used lithium batteries with adhe-
sive tape to prevent short circuits. Electrolyte can escape from damaged lithium bat-
teries. Put the damaged lithium battery in air-tight packaging. Collect the electrolyte
with absorbent paper. Wear rubber gloves while doing so.
Risk of eye damage caused by high light intensity!
The device generates high-intensity light radiation. Looking directly into the light
source can damage the eyes. Never look directly into the light source.

Features

• Professional music stand light with 50 cm wide lamp head
• Even and non-flickering illumination
• Manual dimmer function and adjustable colour temperature of 2700 K to 5200 K
• Automatic dimmer function that adapts to the ambient brightness

Operating elements

ö
$
Front
1. Lamp head
2. Sensor for the automatic dimmer function
3. [BRIGHTNESS] | Switch for selecting the manual or automatic brightness mode
4. [CW] | Rotary control for adjusting the cold white light
5. [WW] | Rotary control for adjusting the warm white light
6. USB-A port for charging smartphones or other devices.
7. [BATTERY SWITCH] | Main switch. Turns the device on and off.
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • info@thomann.de
MANUAL OFF
USB
AUTO CW WW ON
BRIGHTNESS BATTERY SWITCH
% & ' (
Quick start guide
This document contains important information on the safe use of the product.
Read and follow the safety instructions and all other instructions. Keep the docu-
ment for future reference. If you pass the product on to others, please include this
document. Contents are subject to change. Please refer to the latest version of the
documentation, which is available for download at www.thomann.de.
Possible damage to lithium-ion batteries through incorrect storage!
Deep discharge can permanently damage lithium-ion batteries or cause them to lose
some of their capacity. Charge the lithium-ion batteries before longer breaks in use
and before storage. Ensure that the device is switched off for storage. Store the device
at room temperature or cooler in an environment as dry as possible. Recharge the
lithium-ion batteries about every three months if they are stored for a longer period
of time to avoid permanent damage due to too deep self-discharge. Fully charge the
lithium-ion batteries only shortly before use at room temperature.
Extend the operating life of the device by regular breaks and by avoiding frequent
switching on and off. The device is not suitable for continuous operation.
For technological reasons the light output of LEDs decreases over their lifetime. This effect increas-
es with higher operating temperatures. You can extend the service life of the light sources by pro-
viding adequate ventilation and operating the LEDs with the lowest possible brightness.
Operating location
Do not ever use this product:
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty places
• in locations where the device may get wet
General handling
• To prevent damage, never exert force while operating the device.
• Never immerse the device in water. Wipe only with a clean and dry cloth. Do not use liquid
cleaners such as benzene, thinners or flammable cleaning agents
Keep the device away from impurities!
Keep the device away containers with liquid. Should liquid enter the device, this could lead to its
destruction or fire. Ensure that no metallic parts enter the device.
• DMX control possible
• Built-in battery with a running time of up to 9.5 hours
• Shock-proof
• USB-A port for charging smartphones or other devices.
#
100 80 60 40 20
DMX IN DC INPUT 15V=/3A
LED Music Stand Light Pro
Voltage:15V= 3A
Watt: 20W
Item no:330169
) + , -
Back
8. [DMX IN] | DMX input (XLR chassis plug, 3-pin)
9. [DMX OUT] | DMX out | DMX output (XLR chassis socket, 3-pin)
10. Knurled screws for attaching the lamp to the music stand
11. Battery charge indicator
12. [DC INPUT] | Input socket for connecting the power adapter
DMX OUT
+ *
DocID: 330169_19.09.2023
EN