Related Manuals for USX-MOUNT XTL009
Summary of Contents for USX-MOUNT XTL009
- Page 1 XTL009 INSTRUCTION MANUAL For 37-90" TV If you have any questions along the way, just message to us. We’re ready to help! AUUS-C0...
- Page 2 CAUTION: PLEASE READ ENTIRE MANUAL PRIOR TO USE AND SAVE THESE INSTRUCTIONS Before getting started, let’s check below lists to make sure it is just right for you! MAX:600mm/23.62" (MIN:200mm/7.87") Check your TV VESA is within No? This mount is NOT compatible. Min and Max size MAX:400mm/15.75"...
-
Page 3: Wall Plate
Dimensions TV INTERFACE WALL PLATE MAX:600mm/23.62" 609.6mm/24" MIN:200mm/7.87" 508mm/20" 406.4mm/16" 304.8mm/12" 203.2mm/8" MAX:400mm/15.75" 420mm/16.54" MIN:100mm/3.94" 163mm/6.42" 222mm/8.74" 638.6mm/25.14" SIDE VIEW SIDE VIEW 38mm/1.50" 0°~ -10°... -
Page 4: Parts And Hardware
Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. - Page 5 Parts and Hardware for STEP 2 Wall plate(Left) Lag Bolt M8x60mm Wall plate(Right) Level M5x8mm Bolt Allen Key Concrete wall anchor (NOT INCLUDED) Contact us and message to us to have these additional pieces shipped directly to you. Concrete Wall Anchor Ø10x50mm 4pcs 609.6mm(24") 203.2mm(8")
- Page 6 Assemble Wall plate STEP 3 Wall plate unit...
-
Page 7: Step 1 Attach Brackets To Tv
STEP 1 Attach Brackets to TV 1-1 Select TV Screws... - Page 8 1-2 Figure out the suitable position of brackets HIGH MOUNTING HOLES LOW MOUNTING HOLES TV BRACKETS MUST BE LEVEL INSTALL UP/DOWN IF NEEDED...
- Page 9 1-4 Attach the TV Plate 1-3 Need Spacer? No, choose suitable screws and washers. Yes, choose suitable screws, washers and spacers. Tips: If you need to combine M6/M8(c/e/f) screws with 2.5mm spacers( i ), you have to remove the inner circle.
- Page 10 STEP 2A Attach Wall Plate to Wall Wood Stud Option CAUTION: Avoid potential personal injury or property damage! ● Drywall covering the wall, must not exceed 5/8 in. (16 mm) ● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm) ●...
- Page 11 3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. IMPORTANT: Pilot holes must be drilled to a depth of 2.5 in. (64 mm). Be sure to drill into the center of the studs. 4. Install wall plate using lag bolts .
- Page 12 STEP 2B Attach Wall Plate to Solid Concrete Wall CAUTION: Avoid potential personal injury or property damage! ● Mount the wall plate assembly unit directly onto the concrete surface ● Minimum solid concrete thickness: 8 in. (203 mm) 1. Position the mounting template on the wall at your desired height. Level the mounting template and mark the hole locations.
- Page 13 3. Insert anchors. CAUTION: Be sure the anchors are seated flush with the concrete surface. 4. Insert wall plate using lag bolts . Tighten the lag bolts only until they are pulled firmly against the wall plate. CAUTION: Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
- Page 14 STEP 3 Hang and Secure TV to Wall Plate Before hanging TV, please conduct "wall plate installation integrity test" first. 132 LBS (60 kg)
- Page 15 STEP 4 Hang and Secure TV to Wall Plate TV Brackets Pull down...
- Page 16 STEP 5 Adjustments Tilting angle adjustment (0°/-10°) ： Pull TV to your desired angle then fasten 2 tilting bolts with Allen key Tighten Loosen 0° -10°...
- Page 17 STEP 6 Take Down the TV from the Mount Pull down the straps...
Need help?
Do you have a question about the XTL009 and is the answer not in the manual?
Questions and answers