•
AI Start Trigger (ai/StartTrigger)
•
AI Pause Trigger (ai/PauseTrigger)
•
AO Sample Clock
•
AO Start Trigger (ao/StartTrigger)
•
AO Pause Trigger (ao/PauseTrigger)
•
DI Sample Clock (di/SampleClock)
•
DI Start Trigger (di/StartTrigger)
•
DI Reference Trigger (di/ReferenceTrigger)
•
DI Pause Trigger (di/PauseTrigger)
•
DO Sample Clock
•
DO Start Trigger (do/StartTrigger)
•
DO Pause Trigger (do/PauseTrigger)
•
Counter n Source
•
Counter n Gate
•
Counter n Internal Output
•
Counter n Sample Clock
•
Counter n Counter n HW Arm
•
Frequency Output
•
PXI_STAR
•
RTSI <0..7>
•
Analog Comparison Event
•
Change Detection Event
•
Watchdog timer expired pulse
Note
Signals with an
signals are active low.
Note
(
NI PXIe-6386/6396 Devices)
several ways from other SMIO devices. For more information about sample clock
rates related to these devices, go to
smio14ms.
Using PFI Terminals as Static Digital I/Os
Each PFI can be individually configured as a static digital input or a static digital output. When
a terminal is used as a static digital input or output, it is called P1.x or P2.x. On the I/O connector,
each terminal is labeled PFI x/P1.x or PFI x/P2.x.
In addition, X Series devices have up to 32 lines of bidirectional DIO signals.
*
(ao/SampleClock)
*
(do/SampleClock)
*
are inverted before being driven to a terminal; that is, these
PXIe-6386 and PXIe-6396 devices differ in
and enter the Info Code
ni.com/info
X Series User Manual
© National Instruments | 8-3