Advertisement
Quick Links
Installation Guide
EKA 183A with Adaptor for ERC21x Controllers
Programming guide
Components:
ERC 21x Controller
Ordering Number: 080G9740
Pack Contents: EKA 183A, Adaptor with cable assembly
Instruction for connecting to controller:
Step 1
Connect EKA 183A to Adaptor
PC settings:
Refer to the specific documentation (DKRCC.PD.R1.06.02) for further details.
© Danfoss | DCS (az) | 2015.05
EKA 183A
Step 2
Connect Adaptor cable with the controller
Installation guide | EKA 183A
Adaptor with cable assembly
DKRCC.EI.RL0.I2.02 / 520H10102 | 1
Advertisement
Related Manuals for Danfoss EKA 183A
Summary of Contents for Danfoss EKA 183A
- Page 1 Components: ERC 21x Controller EKA 183A Adaptor with cable assembly Ordering Number: 080G9740 Pack Contents: EKA 183A, Adaptor with cable assembly Instruction for connecting to controller: Step 1 Step 2 Connect EKA 183A to Adaptor Connect Adaptor cable with the controller PC settings: Refer to the specific documentation (DKRCC.PD.R1.06.02) for further details.
- Page 2 Programming the controller: EKA 183A is used to copy settings to an ERC21X controller. It can also be used to copy settings from one ERC controller to another ERC controller of the same type, eg. the same software version. Programming steps: EKA 183A is inserted into the controller.