Operating The Remote Control - Philips 28PW6332 - annexe 1 Handbook

Using the remote control
Press:
/
8
Standby
Selecting TV
programmes
Volume
Numerical keys
Mute key
Previous
programme
"Smar t
Controls" k eys
Programmable
keys
Result:
The TV set is switched off and the red indicator
lights up.To switch the TV set on again, press
or keys to
For further information, see "Tips" (p. 21).
Move up or down a programme.
N.B.: Only programmes activated in the
menu can be accessed (see p. 7).
PRGS
The volume is adjusted.
Choose a programme.
For a 2 figure number, the second figure must be
entered before the dash disappears.
Disables or enables the sound.
Return to the last programme watched.
To access the presets of the TV set.
Smart Picture Controls: Press the
the following settings:
return to .
MANUAL
Smart Sound Controls: Press the
the following settings:
, and return to
POP STADIUM
The values corresponding to these presets are given in the
and
PICTURE SOUND
These allow direct access to any adjustment made in
the and
PICTURE SOUND
To program the keys:
If, for example, you wished to gain direct access to the
adjustment. Display the
BRIGHTNESS
(red key) and select
keys and to adjust, rather than the
The keys are now programmed. Exit from the menu
(blue key). Press
direct access to the brightness adjustment. Repeat for
any other adjustment you may wish to make.
This operation may be repeated for any other
adjustment you may wish to make (e.g.
refer to page 13).
.
FAVOURITE
key to obtain
, ,
RICH SOFT NATURAL
key to obtain
, ,
CONCERT CLASSIC
.
MANUAL
menus (see p. 12).
menus (see p. 12)
PICTURE
(
BRIGHTNESS
and again.This will give you
SOUND MODE
and
,
JAZZ
menu
). Use
keys.
: