Philips 28PW6332 - annexe 1 Handbook page 19

To select connected equipment
Use key to select
Most equipment (decoder, video recorder) carries out the switchover itself.
Front connections
Carry out one of the following connections and then:
Use the key to select
Hi-8 cameras).
For a mono sound camcorder, connect the audio signal to the
Use the key to reproduce the sound on the left and right loudspeakers of the
television.
N.B.: If a peripheral is connected to EXT2, it is advisable to switch it off while using
a front S-VHS connection.
Headphones
To adjust the headphones vo l u m e, use the
m e nu (p. 1 4 ) .To adjust the volume on the TV set, use the
You can also access the HEADPHONES adjustment directly using programmable keys
and on the remote control (see p. 8).
Amplifier
Use an audio connection cable and connect the P sockets "L" and "R" on
the set to the "AUDIO IN" "L" and "R" input on your hi-fi amplifier.
, or, for S-VHS or Hi-8 equipment,
E1 (EXT1) E2 (EXT2)
(for VHS or 8mm cameras) or
E2 E2 Y/C
AUDIO L
adjustment in the
HEADPHONES
.
E2 Y/C
(S-VHS or
input.
S O U N D
or keys.
19