Philips 28PW6332 - annexe 1 Handbook page 20

External loudspeakers
For improved sound, you can connect 2 external L and R loudspeakers in the
place of the left and right loudspeakers on the TV set.
Connect as shown below and then switch off the internal loudspeakers on the TV set.
The impedance of the loudspeakers must be between 8 and 16 Ohms.
Surround loudspeakers
Connect the 2 Surround loudspeakers as illustrated below.
The loudspeakers should be located at the rear or on either side of the listening
zone (always connect 2 loudspeakers).
To make a copy of recordings:
Carry out one of the following connections, then:
Press
On the video recorder, select the euroconnector socket as the recording source.
N.B.: Copying is not possible using front connections.
20
to select .
E1