Information For Test Institutes; Customer Care And Service - Bertazzoni HESETECVUG.50 User Manual

10 INFORMATION FOR TEST
INSTITUTES
Appliance for any EcoDesign verification
shall be compliant with EN 62552.
Ventilation requirements, recess
dimensions and minimum rear clearances
shall be as stated in this User Manual at
Chapter 2. Please contact the manufacturer
for any other further information, including
loading plans.
11 CUSTOMER CARE AND
SERVICE
This manual will answer most of your
questions about product's features. Should
you require further information or technical
assistance, please refer to your dealer or
visit our website:
in Italy https://it.bertazzoni.com/altro/
assistenza-e-manutenzione
in the UK https://uk.bertazzoni.com/more/
care-service
in France https://fr.bertazzoni.com/
customer-care
in Spain https://universal.bertazzoni.com/
more/care-service
in the Netherlands https://nl.bertazzoni.
com/zorg-en-service
in Sweden https://se.bertazzoni.com/more/
care-service
in Denmark https://dk.bertazzoni.com/more/
care-service
When contacting our Authorized Service
Centre, write down the model type and
serial number which are available on the
rating plate, and any messages which may
have appeared on the display.
The rating plate is located into the
appliance, on the left lower side of the
refrigerator compartment and close to the
shelves.
Before calling, please make sure to have
the following information ready:
- Date of purchase;
- Name of dealer where product was
purchased.
EN - 48