Table of Contents
Advertisement
Camera Recording
Re-recording on a Previously Recorded Portion
(EDITSEARC:
You can reshoot a scene over the last recorded portion using EDITSEARCH.
The previously recorded portion is erased.
1 Push the cover of the red button up
ser
until it snaps into STANDBY.
a4
START)
STOP
2 Look in the viewfinder and find the
point from where you want to begin
recording by:
Keep pressing the + side of
EDITSEARCH continuously to advance
the picture at a normal playback speed,
or the ~ side to reverse the picture.
+ BDITSEARCH -€)
3 At the desired point, release EDITSEARCH.
4 Press START/STOP.
A beep sounds and recording begins from the
point you released EDITSEARCH.
A smooth transition between scenes can be
STANDBY
made after the pre-recorded portion, even if
i
the cover of the red button is pushed down and
Lock*
pushed up, or even if the power is turned off
and on again, provided that the tape is not
eit
removed.
L
To pause recording
Press START/STOP again.
To stop recording
Push the cover of the red button down to cover START/STOP.
24 Advanced Camera Operation
Advertisement
Table of Contents
