Skil CR5429B-00 Owner's Manual page 18

Wrench Usage
The wrench provided has several functions (Fig. 8a):
1. 1/2" wrench is used to loosen/tighten the blade bolt.
2. 9/16" wrench is used to loosen/tighten the bevel/depth levers when levers are over-tightened
or additional tightening is needed.
3. Blade diamond arbor knock out (wedge feature).
Storage is provided on the tool (Fig. 1). The wrench is fully seated when the second lock detent
is engaged.
NOTE: The wrench needs to be inserted with the correct orientation (Fig. 8b). Damage to
the work piece could occur if
Fig. 8a
2
1/2" Wrench
9/16" Wrench
Vacuum Hose Port (Fig . 9)
Your tool is equipped with a vacuum hose
port for connection to vacuum / dust extractor
hoses with Ø1-1/4'' (32mm).
suitable vacuum extractor hose or use
Use a
an adapter, if necessary.
WARNING
interfere with the lower guard or cutting
operation.
inserted
1
Wedge Feature
Slotted
Driver
Never allow a vacuum /
dust extractor hose to
incorrectly.
Fig. 8b
3
Fig. 9
Correct
Incorrect
Vacuum
hose port
Ø1-1/4"
(32mm)
17